# Advanced Pullback

## Advanced Pullback — Trader's Guide (EN)

> **Pullback Signals upgraded** — Combines **2 timeframes** to filter higher quality signals. Fewer signals, but superior winrate.

***

<figure><img src="/files/hgzgzULfLDzVL3YdWAkd" alt=""><figcaption></figcaption></figure>

### 1. What is Advanced Pullback?

While **standard Pullback Signal** only analyzes the chart's TF RSI, **Advanced Pullback** requires **2 conditions to align**:

1. **The chart TF (Base TF)** is showing a valid pullback
2. **The higher TF (Higher TF)** has RSI in a state matching the signal direction

→ Only when **both timeframes align**, the signal fires.

***

### 2. Why use Advanced Pullback?

#### Problem with single-TF signals

Standard Pullback can fire in scenarios like:

* 15m looks great, but 1H is **trending opposite** → entering = blowup
* 5m fires a signal but 15m is **sideways** → poor R:R

#### The Advanced solution

By **requiring the higher TF to align**, the indicator removes most "against-larger-trend" signals → significant winrate boost.

**Trade-off:** fewer signals (50–70% of standard), but higher win rate (+15–25%).

***

### 3. Enabling Advanced Pullback

#### Step 1 — Open Settings → group **Advanced signals**

#### Step 2 — Choose **Timeframe Signals Mode**

Pick the **TF pair** that matches your style:

| Option       | Trade TF | Confluence TF | For                        |
| ------------ | -------- | ------------- | -------------------------- |
| **5m & 15m** | 5m       | 15m           | Scalper                    |
| **15m & 1h** | 15m      | 1h            | Day-trader                 |
| **1h & 4h**  | 1h       | 4h            | Day-trader / Swing         |
| **4h & 8h**  | 4h       | 8h            | Swing trader               |
| **4h & D**   | 4h       | Daily         | Swing trader (recommended) |
| **8h & 12h** | 8h       | 12h           | Swing trader (crypto)      |
| **D & 3D**   | Daily    | 3D            | Position trader            |
| **D & W**    | Daily    | Weekly        | Position / DCA             |
| **3D & W**   | 3D       | Weekly        | Long-term DCA              |

> **Important:** **Trade TF** is the TF you have your **chart open on**. If you pick `1h & 4h`, you must be on the 1H chart.

#### Step 3 — Chart must be on the correct Trade TF

* If setting = `1h & 4h` but you're viewing the 15m chart → Info Table shows a warning:

  > ⚠️ **Go to 1h to Display Signals**
* Switch chart TF to 1H → signals will appear.

***

### 4. Reading Advanced signals on chart

#### ▲ BUY (light green) — BELOW the bar

> **Different from standard BUY:** **lighter green**, indicator displays the same "BUY" label but with a softer color.

**Meaning:** Both Trade TF AND Confluence TF agree on LONG → enter with greater confidence.

#### ▼ SELL (light red) — ABOVE the bar

> **Different from standard SELL:** **lighter red**.

**Meaning:** Both timeframes confluence SHORT → enter short with high reliability.

***

### 5. Standard Pullback vs Advanced comparison

| Metric                 | Standard Pullback | Advanced Pullback    |
| ---------------------- | ----------------- | -------------------- |
| Number of TFs analyzed | 1 (chart TF)      | 2 (chart TF + HTF)   |
| Signals/month (approx) | \~30–60           | \~10–25              |
| Estimated winrate      | 50–60%            | 65–75%               |
| Average R:R            | 1:1.5             | 1:2.0+               |
| Best for               | Fast day-trader   | Quality swing trader |
| Need to watch chart?   | Continuously      | Can use alerts       |

***

### 6. Tips for trading Advanced Pullback effectively

#### 🎯 Tip 1 — Pick TF pairs with "1:4 ratio"

HTF that's **3–6× the Base TF** gives the best confluence:

* ✅ `15m & 1h` (4×)
* ✅ `1h & 4h` (4×)
* ✅ `4h & D` (6×)
* ⚠️ `4h & 8h` (2× — too close)
* ⚠️ `D & W` (7× — bit too far)

#### 🎯 Tip 2 — Set up dedicated alerts for Advanced

Since Advanced fires rarely, **don't sit at the chart waiting**. Set up an alert (see ALERTS\_GUIDE\_EN.md) with mode `Buy/Sell Advanced Pullback`.

#### 🎯 Tip 3 — Prefer Advanced in volatile markets

When BTC is wild / macro news → many fakeouts → Advanced filters better.

#### 🎯 Tip 4 — Combo Advanced + S/R Volume Zone = A++

Advanced signal firing **inside/near** a Support Zone (for BUY) or Resistance Zone (for SELL) = **golden setup**, you can **size up 1.5×** normal.

#### 🎯 Tip 5 — Check Info Table before entering

Info Table has a "Trend" row — should show **STRONG BULL (3)** or **WEAK BULL (2)** for BUY (and vice versa for SELL). If it shows **NEUTRAL** → be cautious.

#### 🎯 Tip 6 — Combine with EMA 200

Info Table has "EMA 200: Above/Below". Advanced BUY when price is Above EMA200 → **major trend also aligns** → A++ setup.

#### 🎯 Tip 7 — Trade by session

US session for crypto/forex/US stocks is when Advanced signal quality is highest.

#### 🎯 Tip 8 — Don't force trades when the market doesn't offer

A whole week without a single Advanced signal on your watchlist → **don't lower your standard to standard Pullback just to trade**. Switch to **another asset** that's trending.

***

### 7. "Go to {TF} to Display Signals" warning

If Info Table shows a red row:

> ⚠️ Go to **1h** to Display Signals

→ You're on the **wrong chart TF** for your Advanced Mode setting.

**Fix:**

* Switch chart TF to the one your setting requires
* OR change `Timeframe Signals Mode` to `Current timeframe` to use standard signals

***

### 8. Advanced workflow for Advanced Pullback

#### Phase 1 — Pre-market scan (5 min)

1. Open 4H charts of your watchlist assets
2. Check the **RSI Band cloud** — find assets that are **strongly trending** (clearly green/red cloud)
3. Filter down to **3–5 assets** with the cleanest cloud

#### Phase 2 — Set up alerts (10 min)

1. On each selected asset, add the indicator
2. Settings: `1h & 4h` mode (or `4h & D` for longer swing)
3. Set alert mode = `Buy/Sell Advanced Pullback`

#### Phase 3 — Trade when alerts fire

1. Receive alert → open that asset's chart on 1H (or your Trade TF)
2. Apply the **30-second checklist** from GETTING\_STARTED\_EN.md
3. Enter + place SL/TP

#### Phase 4 — Manage (periodically)

1. Open TradingView mobile app, check every 1–2h
2. Reach TP1 → move SL to break-even
3. Opposite signal fires → exit

***

### 9. Hypothetical performance comparison (backtest concept)

> ⚠️ Numbers are illustrative. Actual results vary by asset/market/risk management.

| Strategy                               | Signals/mo | Winrate | Avg R:R | Profit factor |
| -------------------------------------- | ---------- | ------- | ------- | ------------- |
| All standard Pullback                  | \~50       | 55%     | 1.4     | 1.5           |
| Standard + tight cloud filter          | \~30       | 62%     | 1.6     | 1.9           |
| **Advanced Pullback**                  | **\~15**   | **70%** | **2.0** | **2.5**       |
| Advanced + S/R + Hidden Div confluence | \~5        | 80%+    | 2.5+    | 3.0+          |

→ **Lesson:** The tighter the filter, the higher the profit factor. But you need **patience**.

***

### 10. FAQ

#### Q: I selected `1h & 4h` but standard Pullback signals still appear?

**A:** Possibly a confusion. Standard Pullback (deep BUY/SELL) does **not** fire when an HTF mode is selected. Only Advanced (lighter labels) fires. Re-check settings.

#### Q: Advanced fires too rarely, can I "loosen" the filter?

**A:** Not directly. The indicator filters intentionally tight. Only "loosening" options:

* Switch to a closer TF pair (e.g. `15m & 1h` instead of `15m & 4h`)
* Or use a more volatile asset (BTC > Gold > Stocks)

#### Q: Can I trade both standard Pullback and Advanced at once?

**A:** Not in one indicator instance — you must choose one mode. However you can **add 2 instances** to the chart (one in `Current timeframe`, one in `1h & 4h`) → see both signal types. Then:

* Full size when Advanced fires
* 1/3 size when only standard Pullback fires

#### Q: Where to backtest Advanced Pullback?

**A:** TradingView doesn't allow indicator backtesting (only strategies). You must **paper-trade manually** at least 30 trades, log winrate and actual R:R on your chosen asset.

***

***

> **Advanced philosophy:** "Wait less, win more." Fewer = better = richer.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.mrd-indicators.com/feature/tradingview-indicators/mrd-rsi-pullback-eng/advanced-pullback.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.